Firecore Laser Level self-Levelling 4 x 360°, Green Laser Line Level for Construction and Alignment, 2 Rechargeable Lithium Batteries, 2 Stands, Remote Control- G60

Product Features

• Multifunctional 4D Laser: The laser goes into automatic mode after switching on and automatically levels itself within ±3°, beyond which it flashes quickly to indicate an error. When switched off, press and hold the control button for 3 seconds to enter manual mode, where you can select any angle for the laser line projection. The laser line is switched using the ‘H’ and ‘V’ buttons.
• Pulse Mode: After switching on the laser, press the middle button of the control panel, the brightness of the laser line becomes weaker, that is, the device enters the receiver mode, with the receiver(Not included), the working distance can be extended to 50m. Each time you press, the brightness of the laser line decreases, press the fourth time to restore the brightest, which is to exit this mode.
• High Visibility and Remote Control: In the same environment, the green laser has higher visibility than the red laser, the brightness of the G60 device can meet the needs of most DIY jobs, with an accuracy of ±1.5mm/7m. The construction laser supports remote control, and you can use the remote control to change the laser line, brightness setting and pulse mode.
• Flexible Installation: equipped with a Fine-tuning bracket, a strong magnetic holder and a platform that can be raised to meet the requirements of any job. The bracket has a 1/4-20 thread for mounting laser devices. The laser window can be removed and replaced with a screwdriver. Protection class IP54 (shockproof, waterproof, dustproof, abrasion resistant, cold and heat resistant).
• 2 Lithium-ion Batteries: The crosshair laser is equipped with 2 lithium-ion batteries with a capacity of 4000mAh, with which all lasers can be operated continuously for 10 hours. Lower energy consumption, greater range. Class 2 (IEC/EN60825-1/2014), <1m